Garware - OPQ 007

OPQ-007
Garfilm OPQ-007 is a white opaque film pretreated on one side. Improves adhesion to most printing inks. It is used for pressure sensitive labels, security cards and general printing applications.

Sr.No.	Property	Unit	Test Method	Typical Values
General
1	Thickness	Micron	GPL Method	36	50
2	Yield	M² /Kg	GPL Method	19.8	14.3
3	Density	gm/cc	ASTM-D-1505	1.45	1.45
4	Wetting tension ( treated side )	Dynes/cm	ASTM-D-2578	40	40
Mechanical
1	Tensile Strength at break (MD/TD)	Kg/cm²	ASTM-D-882	1550	1550
2	Elongation ( MD / TD )	%	ASTM-D-882	100	100
3	Slip(COF)	--	ASTM-D-1894	0.4	0.4
Optical
1	Whiteness Index	-	ASTM-E-313	110	110
2	VLT	%	ASTM-D-1003	15	15
Thermal
1	Shrinkage @ 190 � C 5 min		ASTM-D-1204
	MD	^%		2.6	2.6
	TD	^%		0.4	0.4
2	Melting Point	^oC	DSC	255	255
Chemical Resistance
	Dilute Acids & Alkalis			Good
	Concentrated Alkalis			Poor
	Concentrated Sulphuric Acid			Poor
	Greases,Oils & Fats			Good
	Seawater			Good
Roll
1	Width - Max	^mm	GPL Method	1350	1350
2	Standard Length - Min.	Mtrs	GPL Method	1050	750
3	Standard Length - Max.	Mtrs	GPL Method	4200	3000

MD - Machine Direction TD - Transverse Direction

The foregoing data have been obtained using standard test procedures on defined specimens. The results should therefore only be regarded as a general guide to material properties and not as design data.

FOR SPECIFIC REQUIREMENTS WRITE TO US



About Us \| Products \| Plants & Facilities \| R&D \| Contact Us